Laney TI100 Tony Iommi Valve Head And TI412S Cabinet

Description

Laney TI100 Tony Iommi Valve Head And TI412S Cabinet – The Rig Of The Legend Himself!

If you are looking for a guitar amplifer head that really has a true monster tone, then look no further the Laney TI100 Tube Head 100w Tony Iommi Signature Guitar Amp. Packing a massive of 100 Watts RMS of metal tones in a twin channel format, Laney have really pulled out all the stops to give you all the character and sonic identity of Tony. Each channel has a Pre Boost feature, allowing you to boost the signal hitting the first pre amp tube giving you that hot and aggressive sound. Furthermore both channels allow you to fine tune and customize your tone with a dedicated 3 band EQ, an Enhance control and also a Presence control. A ture innovator of metal, make sure you dont miss out on the Laney TI100 Tube Head 100w Tony Iommi Signature Guitar Amp.

Here’s what Laney say about the Laney TI100 TUBE HEAD 100w Tony Iommi Signature Guitar Amp

COLLABORATION

The TI100 was born out of an exhaustive period of product development, hand in hand with Tony at every stage, assessing and refining Tony’s sonic needs.
The new TI100 amp represents a significant advance in Tony’s sonic identity whilst still retaining the aggressive tone that Tony is renowned for.

The TI100 delivers 100 Watts RMS of full on metal guitar tone in a twin channel format. Each of the TI100’s channels features a footswitchable Pre Boost which sits right at the front of the pre amp and functions in the same way as your favourite boost pedal on your pedal board works – it does not increase the gain but boosts the signal hitting the first pre amp tube.

SONIC IDENTITY

The two channels on the TI100 are basically the same channels with no sonic difference between them. They have been labelled up as Rhythm and Lead purely for convenience. You can decide on the configuration of each channel.

Each channel has independent Pre -Boost and Drive controls along with dedicated 3 band EQ a channel volume, an Enhance control and a Presence control. The Enhance control allows you to control the amps lower frequency response loosening or tightening the response of the amplifier depending on the volume and the speaker cabinet being used. The Presence control acts on the output section of the amplifier giving you control over the overall brightness of the amplifier.

The rear of the TI100 features the speaker connections and FX loop compliment. Along with power amp in and pre amp out jacks and the unique SYM link feature – specially designed to enable two or more TI100 to be switched simultaneously in sync.

The TI100 – finished in Tony’s trademark cross livery.

There are very few chances in life to claim a first, many people can claim to be the biggest or the fastest but only one person can be the first and in the case of Heavy Metal the first Heavy Metal guitar tone was a Laney.

Head Specifications:

Channel Controls: Pre-Boost, Volume, Drive
Channels: 2
Class: AB
Packed Dimensions (HxWxD mm): 326 x 810 x 360
Equalisation: Bass, Middle,Treble, Enhance and Presence per channel.
Footswitch: FS4 -TI footswitch supplied. SYM Link connector on rear.
FX Loop(s):Send & return jacks assignable to modes – BYPASS, INSERT & SIDE CHAIN.
Inputs: Single
Line In: Yes (from Power amp)
Line Out: Yes (from Preamp)
Output Valves: 4 x 6L6.
Power: 100 Watts.
Preamp Valves: 8 x ECC83.
Speaker connections: 1 x 16 Ohm, 2 x 16 Ohms – 1 x 8 Ohm, 2 x 8 Ohm – 1 x 4 Ohm.
Weight: 25.5 Kg Packed, 21.5 Kg Unit
Unit Dims – for int. case (HxWxD mm): 271 x 678 x 288

THE SOUND IN HIS HEAD

Tony was keen to make sure that the drivers in the TS412S delivered the tone that he heard in his head and that his new signature amplifier is capable of producing.

So after exhaustive testing the conclusion was reached that Celestion G12H (75) proved to be the ideal driver to partner the new TI100. The G12H 75Hz has its low end raised a little in frequency giving punchier lows and a more forward midrange. Which makes it more suited to heavy overdriven sounds in on-stage environments.

Cabinet Specifications:

Baffle: Straight
Cabinet Design: Rugged Plywood construction, black metal corners, castors, Castor cups, Comfortable Side bar handles, Rubber feet – finished in Tony’s trademark livery
Castors: Metal Castors
Packed Dimensions: (HxWxD mm) Width 771mm x Height 756mm x Depth 358mm
Drivers: 4 x 12″ Celestion Heritage G12H (75)
Impedance: 16 Ohms
Inputs: 2 x 6.3mm jack sockets
Kick Proof Metal Grill: Steel – punched with Tony’s trademark cross livery
Power: 120 Watts